PRINCIPLE
Pharmaceutical products can be contaminated by dust. Dust not only pollutes the equipment and machinery used in the production area but also cause dangerous alarms to the pharmaceutical products as well.
PURPOSE
This Standard Operational Procedure is established to provide a proper procedure for the handling and working of dust collector.
SCOPE
It is applicable in the production area.
RESPONSIBILITY
Maintenance officer (Mechanical / Electrical)
Maintenance Supervisor (Mechanical / Electrical)
PROCEDURE
The Dust Collector with instrument is handled in the following way.
MAINTENANCE
MONITORING OF MACHINE MAINTENANCE:
Time to time check each and every part of Dust Collector according to the maintenance schedule. Check the following parts carefully.
vElectric Motor
vVibrating Sifter
vMagnetic Contactor
vTimer & relay
vvWash the filter thoroughly
This activity is then documented in the form Machinery & Equipment Maintenance Log
Check the Dust Collector condition time to time to find any kind of problem during operation.
All the monitoring record is filed and kept by the Maintenance Supervisor.
EMERGENCY / BREAKDOWN MONITORING:
Maintenance Manager receives Maintenance Work Order duly signed by the section incharge of the concerned machinery or equipment.
Maintenance Work Order is assigned a number according to the receiving in the Maintenance Reference Register . Maintenance Manager assigns the maintenance work to the concerned personal
After the completion of work the section incharge signs the completion of Work Order.
All the record is filed and kept by the Maintenance Supervisor.
PRECAUTIONS:
Immediately stop the machine, whenever feel any kind of abnormality during operation.
The machine should be handled by the trained operator. Bearings & Blower
