PURPOSE
It is established for the proper measurement of weight of raw material & pharmaceutical products.
SCOPE
This is applicable to the Quality Control & Warehouse Department.
RESPONSIBILITY
Maintenance officer (Mechanical / Electrical)
Maintenance Supervisor (Mechanical / Electrical)
PROCEDURE
The Balance is handled in the following way.
CLEANING:
Clean the pan of the weighing balance with dry and clean duster.
OPERATION:
Put the power plug in the socket and switch it “ON”.
Switch “ON” the apparatus and confirm its “ON” position by observing 0.00g on displaying screen. Press on if “Tare” required.
Place the sample on the weighing pan.
Note the weight from the displaying screen and remove the sample form the pan.
After weighing again clean with dry and clean duster.
PRECAUTIONS:
Install the balance on a vibration free place.
Check all the circuits before use.Handle the apparatus with care.
